Car tips, car information, car reviews and all about cars. Are you going to buy a new car, buy a used car, selling your old car, repair your damaged car, car maintenance, repainting your car, buying used car parts, get car loan, get car insurance or looking for car information. Whatever it is... I will try my best to provide you with useful tips, information and some pictures of exotic car, sport car, old and new car pictures and car reviews on this blog

Saturday, November 21, 2009

How To Install Car Stereo Amplifier

By Ricky Lim

If you want to maximize the sound system of your car, we suggest that you install a car stereo amplifier in order to power up your speakers.
If you wish to use the subwoofers, you also need to get additional car stereo amplifier for these. Here is how you can install your car stereo amplifier yourself so that you can save money.

First and foremost, you must choose where to put your new car stereo amplifier. If you are putting subwoofers, it is best that you put these in the trunk next to where you put your enclosure.
If you are going to power your main speakers with your car stereo amplifier, then the best place is under the passenger’s seat.

You must have the following wiring for the car stereo amplifier – a thick power cable (check the total wattage of your amp so you know which one to get.
It is best if you consult with a sales rep or turn to the manual of the amplifier) that will reach from the battery of the car stereo amplifier, 3 feet of ground cable that is as thick as the power cable, an RCA signal cable that carry the right and left signals from the head unit to the car stereo amplifier.
If you want to power your main speakers up, you need a 16-gauge wire that would reach each speaker of the amp.

When installing the car stereo amplifier, have the following tools with you: screwdrivers, wire strippers, wire cutters, sandpaper, a utility knife, masking tape with a pen for labeling, and a crimp on o-ring.
You also need a 2-crimp on spade connector if you are hooking the car stereo amplifier for every speaker.

Disconnect the ground cable from the battery. Never work on the electrical system of your car when this is still connected. This is for your own safety as well. Run the power cable through the firewall of your car.
There is an opening on the driver’s side. This will reach to the car stereo amplifier. If the am is in the back, then it is best that you run the wire under the plastic molding that is found along the bottom edge of your car. The wire and the power cable should never twirl and tie up.

Finally, connect everything to the car stereo amplifier. Strip as much as you can at the end of every wire in order to make the connection really solid and stable.
Do not have any wire exposing itself. If there are, then attach the amp with the 12-gauge speaker wire.

About The Author

Discover where to buy cheap car stereo amplifiers online. Learn where to buy cheap 4 channel car amplifiers at my site.

http://getmyarticles.com/

Friday, April 17, 2009

How To Install A Car Stereo

By Victor Epand

Car stereo installation can be an expensive affair. When you have a tight budget it is better off you do it yourself. But if you were an inexperienced person, no matter how good and expensive system you own, it would not be able to produce quality sound.

For better sounding system in your car you need to know how to install it. Installing of a new car stereo in your car is an added advantage for anyone with any experience in wiring. But do not fear, even if you are not, the following points will show you how to install a car stereo system yourself.

Before you install your car stereo there are a few things you need to keep in hand, which includes wire cutters, electrical tape, screwdriver set, wire strippers and of course new gizmo. Here are some tips on how to install the new system that will assure better sounding system.

How to install tip 1 - Buy a new car stereo keeping in mind what you need and what will fit into the slot provided in your car. When you get a new system you may also get a wiring harness, which is specific to both your car with regard to the kind of model and the new audio product.

This will be an added advantage and can make the wiring job much easier. If you are unable to obtain a wiring harness connect each wire yourself. There will be a guidebook to direct you how to connect.

How to install tip 2 - Plug in the wiring harness to the back of your new car stereo to install your new gizmo or connect the positive and the negative wire from each speaker to the positive and negative connector respectively on the back of your sound application first.

Make sure it is connected properly and if you fail to do so, the speakers will not function at all.

How to install tip 3 - Connect the ground wire usually the black wire of the stereo to a screw or a bolt located near to the dashboard where the application is mounted. But make sure the wire attachment is done to a metal and not on plastic or fiberglass.

How to install tip 4 - Connect the 12 constant and ignition power wires to the system. You can refer to the installation instructions to make sure all the wires goes to the correct places.

How to install a tip 5 - Slide your application into the mounting bracket that came with your stereo after you have plug the harness or the wires and then slide it into the slot in the dash. Do not screw it yet as you will need to test it first. You will find one wire connector option on the back of your stereo that is the option for the antenna.

How to install tip 6 - After you have performed all the above-mentioned tips, connect the negative cable of your car to the battery. Then turn on and the power of your system, put some music and listen to all your speakers and make sure everything works. Then you can screw your car stereo into the dash.

About The Author

Victor Epand is an expert consultant for used DVDs, used movies, and used car stereos. You can find the best marketplace for used DVDs, used movies, and used car stereos at these sites for DVD, VCD, magnetic tape, used movies, and ignition power wires, wiring harness.